The Electrak 10 actuators incorporate a robust, strong and reliable screw drive system for applications requiring maximum load capacity. Able to withstand very harsh environments with a stainless steel extension tube, these actuators come in 12, 24, 36 VDC versions and can push or pull loads up to 6800 N (1500 lbf) while holding loads up to 18000 N (4050 lbf). No-load maximum speeds are also possible up to 61 mm/s (2.4 in/s) and stroke lengths up to 610 mm (24 in).
Standard Features and Benefits
- 12, 24 and 36 Vdc - load up to 1500 lbf
- Strong and versatile heavy duty actuator
- High duty cycle
- Highly efficient ball screw drive system
- Overload clutch for mid and end of stroke protection
- Stroke lengths up to 36 inch
- Four different input voltages to chose from
- Motor with thermal switch
- Maintenance free
- Large range of options
|
Parameter
|
Electrak 10
|
| Screw type |
ball |
| Internally restrained |
no |
| Manual override |
no, optional |
| Dynamic braking |
no |
| Holding brake |
yes |
| End of stroke protection |
overload clutch |
| Mid stroke protection |
overload clutch |
| Motor protection |
auto reset thermal switch |
| Motor connection |
flying leads and connector |
| Motor connector |
Packard Electric 56 series 2984883
with terminal 2962987. Mating
connector: 2973781 with terminal
2962573 (p/n 9100-448-001) |
| Certificates |
CE optional* |
| Options |
- potentiometer*
- manual override*
- limit switches* |
| * Contact customer support |
|
|
Parameter
|
|
Electrak 10
|
Maximum load, dynamic / static
D • • -05B5
D • • -10(20)B5
Contact customer support |
[lbf]
|
500 / 3000
1000 / 3000
1500 / 3000
|
Speed, at no load / at maximum load
D • • -05B5
D • • -10B5 (high speed)
D • • -20B5 (standard speed) |
[in/sec]
|
2.40 / 1.40
1.30 / 0.80
0.60 / 0.45
|
| Available input voltages |
[Vdc]
|
12, 24, 36
|
| Standard stroke lengths |
[in]
|
4, 8, 12,
18*, 24*
|
| Operating temperature limits |
[°F]
|
-15 – +150
|
| Full load duty cycle @ 77 °F |
[%]
|
25
|
| End play, maximum |
[in]
|
0.04
|
| Restraining torque |
[lbf-in]
|
100
|
| Lead cross section |
[AWG]
|
14
|
| Lead length |
[in]
|
7.5
|
| Protection class |
|
IP65
|
| * Contact customer support |
|
|
1. Input voltage
D12 - = 12 Vdc
D24 - = 24 Vdc
D36 - = 36 Vdc |
2. Dynamic load capacity and speed
05B5 - = 500 lbf
10B5 - = 1000 lbf, high speed
20B5 - = 1000 lbf, standard speed |
3. Stroke
04 = 4 inch
08 = 8 inch
12 = 12 inch |
