The Electrak 1 actuators are easily interchanged with comparably sized hydraulic or pneumatic cylinders typically used in intermittent duty situations. Made for light, short stroke, and small space applications, these units come in 12, 24, and 36 VDC versions. These acme screw driven actuators come in stroke lengths customizable to 150 mm (6 in) and can push or pull loads up to 340 N (75 lbf) and with no-load speeds ranging to 75 mm/s (3.0 in/s). Available with either limit switches or a feedback potentiometer.
Standard Features and Benefits
- 12 and 24 Vdc - load up to 75 lbf
- Very compact and lightweight
- Potentiometer feedback
- Corrosion resistant housing
- Self-locking acme screw drive system
- Maintenance free
- Internally restrained extension tube
- Ideal for replacement of comparable size pneumatic and hydraulic cylinders
|
Parameter
|
Electrak 1SP
|
| Screw type |
acme |
| Internally restrained |
yes |
| Manual override |
no |
| Dynamic braking |
no |
| Holding brake |
no, self-locking |
| End of stroke protection |
no |
| Mid stroke protection |
no |
| Motor protection |
auto reset thermal switch |
| Motor connection |
flying leads and connector |
| Motor connector |
Packard Electric Pack-Con male 8911773 with terminal 6294511. Mating connector: 8911772 with terminal 8911639 (p/n 9300-448-001) |
| Certificates |
CE optional* |
| Options |
none |
| * Contact customer support |
|
|
Parameter
|
|
Electrak 1SP
|
Maximum load, dynamic / static
S • • -09A4
S • • -17A8 |
[lbf]
|
25 / 300
75 / 300
|
Speed, at no load / at maximum load
S • • -09A4
S • • -17A8 |
[in/sec]
|
3.00 / 2.10
1.00 / 0.65
|
| Available input voltages |
[Vdc]
|
12, 24
|
| Standard stroke lengths |
[in]
|
2, 4, 6
|
| Operating temperature limits |
[°F]
|
-15 – +150
|
| Full load duty cycle @ 77 °F |
[%]
|
25
|
| End play, maximum |
[in]
|
0.036
|
| Restraining torque |
[lbf-in]
|
0
|
| Lead cross section |
[AWG]
|
18
|
| Lead length |
[in]
|
4.5
|
| Protection class |
|
IP65
|
| Potentiometer |
[k0hm]
|
10
|
|
1
|
2
|
3
|
|
SP24 -
|
09A4 -
|
06
|
1. Model and input voltage
SP12 - = Electrak 1SP, 12 Vdc
SP24 - = Electrak 1SP, 24 Vdc |
2. Dynamic load capacity
09A4 - = 25 lbf
17A8 - = 75 lbf |
3. Stroke
02 = 2 inch
04 = 4 inch
06 = 6 inch |
